Page 1 of 1

rbl_host_lookup

Posted: Fri Oct 13, 2017 1:51 am
by pheck
Hello,

receive the following message constantly - can't find anything in the forum. Can it be ignored?

Code: Select all

Oct 13 09:14:52 h2729830 magicspam-daemon[19986]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 13 09:14:52 h2729830 magicspam-daemon[19986]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 13 09:29:46 h2729830 magicspam-daemon[24524]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 13 09:29:46 h2729830 magicspam-daemon[24524]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 13 09:30:58 h2729830 magicspam-daemon[24859]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 13 09:30:58 h2729830 magicspam-daemon[24859]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Cheers Peter

Re: rbl_host_lookup

Posted: Fri Oct 13, 2017 4:35 pm
by magicspam
Hello Peter,

Thank you for your post and the log information.

From the logs, it is a verbose output caused by an incoming connection through IPv6.
In newer version of MagicSpam, this condition has been addressed.

If you could let us know what version of MagicSpam or MagicSpam Pro you are running, we would be happy to provide you with instructions on upgrading.

Please let us know if you have any further questions.


-- MagicSpam Support Team --

Re: rbl_host_lookup

Posted: Tue Oct 17, 2017 11:11 am
by pheck
Already posted a reply on the weekend - I have the latest version 2.1-8

Re: rbl_host_lookup

Posted: Tue Oct 17, 2017 5:41 pm
by magicspam
Hello Peter,

Thank you for your post.

As it seems that you are already running the latest version of MagicSpam, can you please let us know if you are using Postfix or Qmail, as well as if there any other log lines in:

* /var/log/maillog

that correspond with the reported error messages that might shed light on what the email was?

Thank you Peter,

Re: rbl_host_lookup

Posted: Wed Oct 18, 2017 2:38 am
by pheck
I am using Postfix.

Below one complete example:

Code: Select all

Oct 18 11:35:37 h2729830 plesk_saslauthd[17428]: select timeout, exiting
Oct 18 11:35:37 h2729830 postfix/smtpd[13623]: connect from srv457.mailer-service.de[217.115.137.57]
Oct 18 11:35:38 h2729830 magicspam-daemon[17443]: rbl_host_lookup.c:157 ERROR is_rbl_hit(): Provided state does not have a valid IP address
Oct 18 11:35:38 h2729830 postfix/smtpd[13623]: 23BA71EE8059B: client=srv457.mailer-service.de[217.115.137.57]
Oct 18 11:35:38 h2729830 postfix/cleanup[17444]: 23BA71EE8059B: message-id=<9e78f6569a334b8c79df7632868247e5@mailer-service.de>
Oct 18 11:35:38 h2729830 check-quota[17445]: Starting the check-quota filter...
Oct 18 11:35:38 h2729830 /usr/lib/plesk-9.0/psa-pc-remote[1179]: handlers_stderr: SKIP
Oct 18 11:35:38 h2729830 /usr/lib/plesk-9.0/psa-pc-remote[1179]: SKIP during call 'check-quota' handler
Oct 18 11:35:38 h2729830 /usr/lib/plesk-9.0/psa-pc-remote[1179]: handlers_stderr: SKIP
Oct 18 11:35:38 h2729830 /usr/lib/plesk-9.0/psa-pc-remote[1179]: SKIP during call 'magicspam-flag' handler
Oct 18 11:35:38 h2729830 postfix/qmgr[30381]: 23BA71EE8059B: from=<postmaster@mailer-service.de>, size=5919, nrcpt=1 (queue active)
Oct 18 11:35:38 h2729830 postfix/smtpd[13623]: disconnect from srv457.mailer-service.de[217.115.137.57] ehlo=1 mail=1 rcpt=1 data=1 quit=1 commands=5
Oct 18 11:35:38 h2729830 postfix-local[17448]: postfix-local: from=postmaster@mailer-service.de, to=info@hub-reisen.de, dirname=/var/qmail/mailnames
Oct 18 11:35:38 h2729830 dovecot: service=lda, user=info@hub-reisen.de, ip=[]. msgid=<9e78f6569a334b8c79df7632868247e5@mailer-service.de>: saved mail to INBOX
Oct 18 11:35:38 h2729830 check-quota[17456]: cannot get sender domain
Oct 18 11:35:38 h2729830 check-quota[17456]: Unable to intialize check-quota mail handler
Oct 18 11:35:38 h2729830 plesk sendmail[17455]: Error during 'check-quota' handler
Oct 18 11:35:38 h2729830 plesk sendmail[17455]: handlers_stderr: SKIP
Oct 18 11:35:38 h2729830 plesk sendmail[17455]: SKIP during call 'magicspam-flag' handler
Oct 18 11:35:38 h2729830 postfix/pickup[7975]: 468CA1EE80945: uid=30 from=<SRS0=xjc1=BR=mailer-service.de=postmaster@hub-reisen.de>
Oct 18 11:35:38 h2729830 postfix/cleanup[17444]: 468CA1EE80945: message-id=<9e78f6569a334b8c79df7632868247e5@mailer-service.de>
Oct 18 11:35:38 h2729830 postfix/pipe[17447]: 23BA71EE8059B: to=<info@hub-reisen.de>, relay=plesk_virtual, delay=0.38, delays=0.32/0/0/0.05, dsn=2.0.0, status=sent (delivered via plesk_virtual service)
Oct 18 11:35:38 h2729830 postfix/qmgr[30381]: 23BA71EE8059B: removed
Oct 18 11:35:38 h2729830 postfix/qmgr[30381]: 468CA1EE80945: from=<SRS0=xjc1=BR=mailer-service.de=postmaster@hub-reisen.de>, size=6088, nrcpt=1 (queue active)
Oct 18 11:35:38 h2729830 postfix/smtp[17461]: 468CA1EE80945: to=<christine.hub@takeoff-reisen.de>, relay=mx02.owis365.de[195.160.231.34]:25, delay=0.62, delays=0.01/0.01/0.37/0.24, dsn=5.7.1, status=bounced (host mx02.owis365.de[195.160.231.34] said: 550 5.7.1 Error: content rejected (in reply to end of DATA command))
Oct 18 11:35:38 h2729830 postfix/cleanup[17444]: E2BD11EE8059B: message-id=<20171018093538.E2BD11EE8059B@mail.ph-internet.net>
Oct 18 11:35:38 h2729830 postfix/bounce[17462]: 468CA1EE80945: sender non-delivery notification: E2BD11EE8059B
Oct 18 11:35:38 h2729830 postfix/qmgr[30381]: E2BD11EE8059B: from=<>, size=8333, nrcpt=1 (queue active)
Oct 18 11:35:38 h2729830 postfix/qmgr[30381]: 468CA1EE80945: removed
Oct 18 11:35:38 h2729830 postfix-local[17463]: postfix-local: from=MAILER-DAEMON, to=srs0=xjc1=br=mailer-service.de=postmaster@hub-reisen.de, dirname=/var/qmail/mailnames
Oct 18 11:35:38 h2729830 postfix-local[17463]: cannot chdir to mailname dir srs0=xjc1=br=mailer-service.de=postmaster: No such file or directory
Oct 18 11:35:38 h2729830 postfix-local[17463]: Unknown user: srs0=xjc1=br=mailer-service.de=postmaster@hub-reisen.de
Oct 18 11:35:38 h2729830 postfix/pipe[17447]: E2BD11EE8059B: to=<SRS0=xjc1=BR=mailer-service.de=postmaster@hub-reisen.de>, relay=plesk_virtual, delay=0.01, delays=0/0/0/0.01, dsn=2.0.0, status=sent (delivered via plesk_virtu
Cheers Peter

Re: rbl_host_lookup

Posted: Thu Oct 19, 2017 1:53 pm
by magicspam
Hello Peter,

Thank you for your post.

Could you please post the result of:

postconf milter_connect_macros

And, if the result is *NOT*

j {daemon_name} {client_connections} {client_addr} {client_ptr} v

then run:

postconf -e "milter_connect_macros=j {daemon_name} {client_connections} {client_addr} {client_ptr} v"

Can you please let us know if this resolves the issue, otherwise, let us know and we will further investigate this issue.

Thank you,

Re: rbl_host_lookup

Posted: Thu Oct 19, 2017 9:35 pm
by pheck

Code: Select all

root@h2729830:/home/eljeffe# postconf milter_connect_macros
milter_connect_macros = j {daemon_name} {client_connections} {client_addr} {client_ptr} v

Re: rbl_host_lookup

Posted: Mon Oct 23, 2017 6:10 pm
by magicspam
Hello Peter,

Thank you for your post.

This issue is now being investigated by our development team and we will follow up with you again by the end of the week.

Please let us know if you have any questions in the meantime.

Re: rbl_host_lookup

Posted: Tue Oct 31, 2017 4:20 pm
by magicspam
Hello Peter,

Thank you for your patience with this issue.

After consultation with our development team, we would like to let you know that the reported log message is not indicative of a serious error and it can be safely ignored. Please note that this issue will be addressed in an upcoming MagicSpam update.

Please let us know if you have any questions and thank you again for reporting this issue with us.